Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

MPLS mib variable (1.3.6.1.4.1.9.?????)

Hi All ,

I am running mpls on Cisco 12012/GRP router with IOS Version 12.0(21)ST3 .

I want to know the mpls mib variable ( like 1.3.6.1.4.1.9.????) to do snmpwalk to the router .

Cisco recommed to use 1.3.6.1.4.1.9.10.65 . but i am not getting any mpls orianted snmp data by using the above variable .

Please let me know the mib variables.

1 REPLY
Silver

Re: MPLS mib variable (1.3.6.1.4.1.9.?????)

This is a long shot but make sure that you are using LDP and not TDP. 1.3.6.1.4.1.9.10.65 is a MPLS Label Distribution Protocol (LDP) MIB. You could also refer to the document 'MPLS LDP MIB' at the URL http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00801149ff.html#75570.

Refer to the section 'Supported Mibs and RFC's' in the document 'Cisco 12000 Series Internet Router Basics' for a list of supported Mibs. The document is available at the URL http://www.cisco.com/en/US/products/hw/routers/ps167/products_configuration_guide_chapter09186a0080110956.html#xtocid6

236
Views
0
Helpful
1
Replies
CreatePlease to create content