I am desiging an MPLS network for an enterprise customer. He would like to have both L2 and L3 VPNs (EoMPLS and VPLS). Initially I thought of positioning ASR1000 but later I ruled it out as it does not support VPLS. So it comes down to 7600. Then I have seen that we have 67XX, ES20 and SIP400 line cards. So what should be my choice for CE facing and Core facing line cards to run all the MPLS services (including MVPN). The customer needs only 3 ports to the access and 1 port as uplink.
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...