I've to build up a new domestic MPLS network and I'd like to find some guide lines for the best PE/CE routing protocol decision (ie pro, cons, max number of prefix supported, max number of protocol instance config on the PE, example of best config, etc).
I'd like to standardize this protocol decision and config (this is done today in different way by any system engineer configuring the CE..)
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...