Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MPLS Per VRF QOS

Our WAN cloud will be a mesh between 3 campuses. Our provider will provide Layer 2 transport services, 1Gbps, FIFO. At each campus I will be running 2821 for WAN edge.

All services will be converged onto this WAN, Voice, Video, Data.

At each campus runs 3750 or 6513 as Campus Core peering 2821's. Each campus will be running VRF-Lite. My goal is to become the MPLS service provider for the college. The 2821's are the PE devices and the Campus Core's are the CE devices. Example, Voice will have it's own VRF at each respective site, each vrf will learn routes from other voice vrf's from the 2821's. Currently the 2821's peer each other iBGP. I want to be able to allocate portions of bandwidth (1Gb) for each VRF on the WAN and queue the traffic within each VRF.

1 REPLY
New Member

Re: MPLS Per VRF QOS

Hi,

You need to configure normal QoS, remark the triple play traffic (data voice video) in ingress interface on the switch and implement queuing and bandwidth reservation out the egress interface of the router.

Regards,

W.Amer

942
Views
0
Helpful
1
Replies