in the diagram we are getting 12000 routes from the clinet central loaction.now the issue is that these clinets are directly terminating to my PE.In this case how can we use the summarization becasue everytime we have to use the static routing and the number of location thru the country is 4000 and the vrf routers are 12000.
Can you pls elaborate your question. Its not very clear. If you are using static routes then how are you then receiving 12k routes form your central CE.
Although you can limit the number of routes per CE at the PE, which would be a part of you SLA with the customer. But again if you are using static at each location then this should be well under your control.
rt now we are having connectivity with the clinet central location and we are getting summarized riutes from the clinet central location but now onwards clinet is going to directly coming on our PE in that case we use the static routing and redistribute that static route in the vrf .So we need at least 3 static routes for each location.
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on...
Internet security is important with the increasing attacks that are happening every day. Many internet and browsing security solutions exist, but some are not very easy to use or maybe the question is how can I enable them?