Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MPLS Support for 3620 Router

Hi,

is there any IOS version available, which supports MPLS. This is only required in a lab for CCIP preparation.

Frank

1 ACCEPTED SOLUTION

Accepted Solutions
ft
New Member

Re: MPLS Support for 3620 Router

3620(config-if)#mpls label protocol ?

both Use LDP or TDP (Adapt to peer on multiaccess interface)

ldp Use LDP

tdp Use TDP (default)

3620#show ver

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3620-J1S3-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Thu 14-Apr-05 22:31 by yiyan

Image text-base: 0x6000891C, data-base: 0x619D4000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

ROM: 3600 Software (C3620-I-M), Version 11.2(26)P, RELEASE SOFTWARE (fc1)

fr uptime is 1 day, 11 hours, 55 minutes

System returned to ROM by power-on

System image file is "flash:c3620-j1s3-mz.122-13.T16.bin"

cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes of memory.

Processor board ID XXXXXXXX

R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

TN3270 Emulation software.

8 Low-speed serial(sync/async) network interface(s)

29K bytes of non-volatile configuration memory.

24576K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

8 REPLIES
Cisco Employee

Re: MPLS Support for 3620 Router

MPLS is not supported on the 3620.

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
New Member

Re: MPLS Support for 3620 Router

MPLS support was in 12.2(16) Enterprise even for 2600 routers. I think it might be supported for 3600 also.

At least for lab purposes.

New Member

Re: MPLS Support for 3620 Router

Thanks for your feedback.

I have running IOS 12.2 Enterprise but this version is supporting tag switching only (tdp and no ldp).

For my purposes is it sufficient.

Frank

New Member

Re: MPLS Support for 3620 Router

Frank,

12.3 or 12.2.15T Enterprise version support mpls ldp in the 2600 platform. Tdp, Cisco pre-standardize implementation method, is a subset of the ldp. To learn MPLS and VPN concept, you really don't need ldp, in my opinion, unless you dig deep into InterAS, Carrier over Carrier, TE, or AToM feature sets.

Edwin

ft
New Member

Re: MPLS Support for 3620 Router

3620(config-if)#mpls label protocol ?

both Use LDP or TDP (Adapt to peer on multiaccess interface)

ldp Use LDP

tdp Use TDP (default)

3620#show ver

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3620-J1S3-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Thu 14-Apr-05 22:31 by yiyan

Image text-base: 0x6000891C, data-base: 0x619D4000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

ROM: 3600 Software (C3620-I-M), Version 11.2(26)P, RELEASE SOFTWARE (fc1)

fr uptime is 1 day, 11 hours, 55 minutes

System returned to ROM by power-on

System image file is "flash:c3620-j1s3-mz.122-13.T16.bin"

cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes of memory.

Processor board ID XXXXXXXX

R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

TN3270 Emulation software.

8 Low-speed serial(sync/async) network interface(s)

29K bytes of non-volatile configuration memory.

24576K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

New Member

Re: MPLS Support for 3620 Router

Thanks a lot.

It works and will improve my preparation for the CCIP exam.

Frank

New Member

Re: MPLS Support for 3620 Router

I'm running 12.0(24.4)S2 in my lab and it supports LDP, etc.

joel_pe1#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3620-K4P-M), Version 12.0(24.4)S2, EARLY DEPLOYMENT MAINTENANCE INTERIM SOFTWARE

cisco 3620 (R4700) processor (revision 0x81) with 49152K/16384K bytes of memory.

joel_pe1#sh mpls ldp nei

Peer LDP Ident: 154.11.0.4:0; Local LDP Ident 154.11.0.2:0

joel_pe1#dir

Directory of flash:/

1 -rw- 6353696 c3620-k4p-mz.120-24.4.S2

New Member

MPLS Support for 3620 Router

Hi,

I realise this thread is very old, and the 3620 even older and unsupported now, but ive got a bunch of them lying around and was trying to do an MPLS lab with them.

Looks like "c3620-j1s3-mz.122-13.T16.bin" is not available on CCO for download any more, and "c3620-j1s3-mz.123-26.bin" which is on my box does not support MPLS (would have thought it carried features from 12.2T but apparently not for MPLS for this image).

any way i can get hold of an MPLS image for lab purposes only ?

thanks

Mark

1718
Views
0
Helpful
8
Replies