In my network, one 7600 with PFC-3BXL mode runs MPLS. Now I need to install a card which belongs to CFC mode. In that case what will be the opration mode of 7600 and is there any affect on mpls feature?
If you supervisory is PFC-3BXL then the working mode of 7600 is PFC-3BXL. But if you install an line card with DFC-3A then the working mode is PFC-3A. This will not support mpls. This is explained in the cisco documents. But If the line card is CFC, then what is the working mode of the 7600 and does it support MPLS?
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...