02-12-2004 11:10 AM
Does anyone have links to MPLS-TE 'tunnel mpls' support for 7600 series? Is the extent of MPLS support in the 7600 limited to MPLS VPN and EoMPLS?
Thanks,
Greg
02-12-2004 03:48 PM
According to the Feature Navigator on CCO, the 7600 supports MPLS TE with 12,2(14)SY3.
Feature Navigator:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Hope this helps,
02-13-2004 10:51 AM
Yes, I did find that earlier, but I was mainly wondering how much is available? The 7600 command reference doesn't seem to list these commands.
02-13-2004 12:43 PM
If you let me know exactly what features you are looking at implementing, I will check their availability on the 7600 platform.
02-16-2004 07:46 AM
Mainly looking for the basics right now.
interface Tunnel14
ip unnumbered Loopback0
tunnel destination 36.11.1.17
tunnel mode mpls traffic-eng
tunnel mpls traffic-eng autoroute announce
tunnel mpls traffic-eng autoroute metric absolute 500
tunnel mpls traffic-eng bandwidth 100
tunnel mpls traffic-eng priority 2 3
tunnel mpls traffic-eng affinity 400
tunnel mpls traffic-eng path-option 1 explicit name 14a
tunnel mpls traffic-eng path-option 2 explicit name 14b
!
ip explicit-path name 14a
next-address 14.14.14.14
next-address 15.15.15.15
!
ip explicit-path name 14b
next-address 41.41.41.41
next-address 51.51.51.51
Also, I assume fast reroute is not available yet?
Thanks,
Greg
02-16-2004 06:53 PM
This configuration is supported on the 7600. FRR is not supported on the 7600. This shouldn't really be an issue since the 7600 is an edge device and therefore doesn't really require FRR support.
Hope this helps,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: