MPLS-TE on 7600?

[GREGORY GEE]

Does anyone have links to MPLS-TE 'tunnel mpls' support for 7600 series? Is the extent of MPLS support in the 7600 limited to MPLS VPN and EoMPLS?

Thanks,

Greg

[Harold Ritter]

According to the Feature Navigator on CCO, the 7600 supports MPLS TE with 12,2(14)SY3.

Feature Navigator:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

Hope this helps,

[GREGORY GEE]

Yes, I did find that earlier, but I was mainly wondering how much is available? The 7600 command reference doesn't seem to list these commands.

[Harold Ritter]

If you let me know exactly what features you are looking at implementing, I will check their availability on the 7600 platform.

[GREGORY GEE]

Mainly looking for the basics right now.

interface Tunnel14

ip unnumbered Loopback0

tunnel destination 36.11.1.17

tunnel mode mpls traffic-eng

tunnel mpls traffic-eng autoroute announce

tunnel mpls traffic-eng autoroute metric absolute 500

tunnel mpls traffic-eng bandwidth 100

tunnel mpls traffic-eng priority 2 3

tunnel mpls traffic-eng affinity 400

tunnel mpls traffic-eng path-option 1 explicit name 14a

tunnel mpls traffic-eng path-option 2 explicit name 14b

!

ip explicit-path name 14a

next-address 14.14.14.14

next-address 15.15.15.15

!

ip explicit-path name 14b

next-address 41.41.41.41

next-address 51.51.51.51

Also, I assume fast reroute is not available yet?

Thanks,

Greg

[Harold Ritter]

This configuration is supported on the 7600. FRR is not supported on the 7600. This shouldn't really be an issue since the 7600 is an edge device and therefore doesn't really require FRR support.

Hope this helps,