I have some questions regarding MPLS Traffic Eingineering for link-bundle. Any answer would be appreciated.
1. In ASR9k, does it support auto bandwidth adjustment of link-bundle in traffic engineering? i.e. the max reserved bandwidth for a bundle interface with three physical interfaces is 900Mbps. If one physical interface down, will it become 600Mbps?
2. If the answer to the above is true, will the interface decide to drop low priority tunnels if there is not enough bandwidth to hold all the tunnels?
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...