In VPN n/w i have DC & DR. Both DC & DR r geographically separate. Server IP pool used both in DC & DR is different. Need to configure MPLS VPN in such way that when DC is active spoke should not able to access DR. when DC becomes unvailable spoke shoould able to access DR.
I m thinkin of conditional BGP. Let me know if you have any suggestion on conditional BGP or different solution.
In my scenario if DC & DR both have different IP pool then I in customer VRF (in MPLS VPN cloud) both IP pool will become available and spoke location can access both DC & DR simultaneously which I do not want.
I want client to only able to access DR if DC fails.
Can I use BGP conditional advertising feature in MP-IBGP instead of eBGP. i.e. if particular route present in end A PE router VRF then do not advertise alternate route to end B PE router something like this...
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...