I am trying to configure an MPLS VPN for internet access using L2TP and Radius. I have a dial up user account being dynamically assigned to a VRF which works fine and can see the other end of the VPN. I cannot, however, seem to get internet access working by leaking a route to the global internet. I have read the documentation which explains a standard static site VRF with a static route using the 'global' option, but the dial account uses a dynamic Virtual Interface that is different every time the user logs on and is connected to the LNS. Any help would be appreciated.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...