We have one Client wished to run MPLS VPN. His head office is connected to our ISP Backbone via a leased line, all other branches are connected via ADSL. The IP addresses are assigned to the DSL when the user connects and the DSL gets a virtual interface on the PE when it connects
Whether MPLS VPN is possible with this dynamically created Virtual interface and Head office?
In any case I think we need to be depending on Cisco AVPair , But I'm using a third party radius software which doesn't support AVPair . I'm little bit confused about about how I can do a vrf under virtual-template without depending on Radius .
It can be done by simply applying the "ip vrf forwarding x" command under the virtual-template interface itself, then when the virtual-access is cloned it will inherit the VRF under the virtual-template.
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on...
Internet security is important with the increasing attacks that are happening every day. Many internet and browsing security solutions exist, but some are not very easy to use or maybe the question is how can I enable them?