Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

mpls-vpn-rr-group

at r1,r2 rr-group both deny rt 1:5.

why can r5 learned route of r8??

and why can r5 can ping r8?

topo and configration download

3 REPLIES
Hall of Fame Super Silver

Re: mpls-vpn-rr-group

Hello Wang,

I think the question is this:

the extended community list look for a RT that contains only 1:5

actually the routes have an RT made of two RTs

1:1 1:5

or 1:2 1:5

so this is to be taken in account

Hope to help

Giuseppe

Hall of Fame Super Silver

Re: mpls-vpn-rr-group

Hello Wang,

have you tried to reset the BGP sessions on R1 and R2 to PE nodes R3 and R4.

I've reviewed the command reference and probably the behaviour of standard extended community-list is the one you expect:

there is an implicit deny any at the end

and you can only specify one RT value for line.

see

http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_bgp2.html#wp1016299

instead an expanded extended community list access-list like

ip extcommunity-list ?

<1-99> Extended Community list number (standard)

<100-500> Extended Community list number (expanded)

expanded Add an expanded community-list entry

standard Add a standard community-list entry

a line like the following can be an exact match in your case

RT-RM-SXR000-G1-E-1(config)#ip extcommunity-list 101 deny RT:1:1 RT:1:5 ?

LINE

Hope to help

Giuseppe

New Member

Re: mpls-vpn-rr-group

hello ,i checked config today ,but question awlays has,i thank may not question of rt.

thanks

212
Views
0
Helpful
3
Replies