I am working now on a MPLS/VPN implementation but before I start working on the real thing, I made a test lab implementation.
Everything was OK on the test lab, so I start working on the real network. Everything is OK, I have made three VPNs and it is working OK, BUT I have a difference between the test lab implementation, here is the issue:
On the CE-Router when I use the traceroute I got the following output:
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...