Hi I look for informatiom about MPLS network with 2 different S. Provider connection with each CPE . For redundancy. VPN and voice is a requirement. Anybody knows where can I find information, tips or exemples ? TIA
Yes you can load balance between the two SP with routing manipulation.
You may want to use the per-session load balancing in CEF for the routes.
Lastly generally a service provider has a 5 9's uptime per pop. So rather than going for 2 service providers you can consider two last mile connection from 2 different telco's and connect to 2 different PE's in the same pop.
This would be cost effective as the same SP will give this service as a value add.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...