Looking for some details on do's and dont's for Multi-VRF CE. Also wondering how CoS/QoS is supported. If I want to do CBWFQ on the CE that is supporting Multi-VRF CE can I do it per subinterface to have a policy per VRF?
It depends on what platform you are using. The 7200 and 7300 do not support CBWFQ on sub-interfaces right now. Ive heard September this year but wont hold my breath. The 12k supports it but only on the E3 card not the 10portgigE4+ card.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...