Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MVPN in between NX-OS and IOS

I'm having an issue configuring mvpn in between a N7K and IOS Router.

On the IOS router, i'm seeing this error message:

DT-4-INCOMPATIBLE_TUNNEL_TYPE: Incompatible tunnel type in BGP update router_id:10.16.32.1 RD:10.16.32.1:13 type:1 tunnel_type:4; local tunnel_type:0.

10.16.32.1 is the router-id of the N7K.

I have a source connected to the IOS router, and a reciever connected to the N7K.

the mroute *is* installed into the mroute table.

I haven't been able to find any way to adjust the "tunnel type " for mvpn's on either the N7K's or the IOS Routers.

Unicast routing is working as expected.

Any pointers would be highly appriciated

N7K:

Software

  BIOS:      version 2.8.0

  kickstart: version 6.1(4)

  system:    version 6.1(4)

  BIOS compile time:       06/09/12

  kickstart image file is: bootflash:///n7000-s2-kickstart.6.1.4.bin

  kickstart compile time:  12/25/2020 12:00:00 [05/16/2013 03:52:57]

  system image file is:    bootflash:///n7000-s2-dk9.6.1.4.bin

  system compile time:     3/11/2013 23:00:00 [05/16/2013 04:57:07]

IOS:

System returned to ROM by reload at 11:51:18 UTC Tue Sep 24 2013

System image file is "flash:/c3900e-universalk9-mz.SPA.153-3.M.bin"

Thanks,

Søren

  • MPLS
1 ACCEPTED SOLUTION

Accepted Solutions

MVPN in between NX-OS and IOS

The issue appears when there's a mismatch in the type of multicast for the MDT - ASM vs. SSM.

2 REPLIES

MVPN in between NX-OS and IOS

The issue appears when there's a mismatch in the type of multicast for the MDT - ASM vs. SSM.

New Member

MVPN in between NX-OS and IOS

hehe, thanks mate

ip pim ssm default - the saviour - and you.

Beer's are on me!

509
Views
0
Helpful
2
Replies
This widget could not be displayed.