Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

net flow with vrf

i use 2 vrfs. i configured net flow, and it sent but i didn't recieve. i used the same configuration on other router without vrfs - worked fine.

is there another command to use net flow with vrfs? i have C3845-IPBASEK9-M.

4 REPLIES

Re: net flow with vrf

AFAIK, you will need MPLS Aware Netflow (Netflow V9) supported by your IOS and the switching platform. I believe this support is there in IOS 12.4T.

These links would be handy in configuring the same.

MPLS-Aware Netflow

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00805e1147.html

MPLS Egress Netflow

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00805e1253.html

HTH-Cheers,

Swaroop

New Member

Re: net flow with vrf

according to the feature navigator, MPLS-Aware Netflow doesn't work with 3845, no matter which image i use.

can it be?

do i have some other option?

Re: net flow with vrf

Pls go through this white paper, it lists the platforms and the supported netflow versions and features per platform.

http://www.cisco.com/en/US/tech/tk812/technologies_white_paper0900aecd802a0eb9.shtml

As per it you should have the Netflow V9 in 12.4T.

HTH-Cheers,

Swaroop

Re: net flow with vrf

I checked the FN, as it doesnt show up the 3845 for the MPLS Aware Netflow.

Although it does support Netflow V9 export, which will export couple of new data sets including MPLS.

But I believe on the 3845 the MPLS accounting is not there yet, so even if it supports exporting that data, there is no capability to account for it in the first place.

Its a good idea to check with your local account SE regarding any roadmap of the feature for your platform.

HTH-Cheers,

Swaroop

507
Views
0
Helpful
4
Replies