I am unable to synchronize my router's clock with a NTP server located in a VRF attached to the router. I specified the MPLS interface in a "ntp source" statement but the debugging output still reports that there is no route to the server. Is this possible to do? Thanks in advance.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...