I'm having situation whereby my customer CE2 is running multihoming. Both links need to be up all the times. However, on site, which is CE3 connected to the same PE (PE3). Attach network diagram to ease reference.
From CE3 going to CE2 of course it does follow directly based on OSPF 110 AD due to MP-iBGP 200 AD.
pe3#sh ip route vrf vpn 188.8.131.52
*Mar 1 04:05:29.438: %SYS-5-CONFIG_I: Configured from console by console
pe3#sh ip route vrf vpn 192.168.2.1
Routing entry for 192.168.2.1/32
Known via "ospf 2000", distance 110, metric 65, type intra area
Redistributing via bgp 100
Advertised by bgp 100
Last update from 172.16.4.2 on Serial0/1, 00:35:39 ago
Routing Descriptor Blocks:
* 172.16.4.2, from 192.168.2.1, 00:35:39 ago, via Serial0/1
Route metric is 65, traffic share count is 1
pe3#sh ip bgp vpn vrf vpn 192.168.2.1
BGP routing table entry for 100:100:192.168.2.1/32, version 169
Paths: (2 available, best #2, table vpn)
Advertised to update-groups:
10.10.10.2 (metric 30) from 10.10.10.2 (10.10.10.2)
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...