Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

please check up our configuration at h-vpls

hi..

I would like to confirm our topology with configuration.

this's goal is that CE with attached to UPE with Port-based must communication other side CE through H-VPLS Architecture.

Remark: VC ID is 100, H-VPLS vlan tag is 100, VC ID 100

VPLS Device's Loopback address:1.1.1.1/32

CE(2600)

int fa0/0

desc to vpls_UPE

ip address 1.1.1.1 255.255.255.0

no sh

UPE(7600)

int gi0/1

desc from CE 2600

xconnect 1.1.1.1 100 encapsulation mpls

NPE(7600)

vfi name vpls100

vcid 100

neighbor 2.2.2.2 encapsulation mpls

neighbor 1.1.1.1 encapsulation mpls no-split-horizon

!

int vlan 100

xconnect vfi vpls100

!

The other site's configuration is same. I concern about How can communication VC type 5 to H-VPLS architecture?

any thought?

thank in advance.

1 REPLY
Cisco Employee

Re: please check up our configuration at h-vpls

Hi,

Not sure to completely understand your question but 7600 negotiate VC-type 5 by default.

HTH

Laurent.

265
Views
0
Helpful
1
Replies
CreatePlease to create content