Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Please, i need your help to fix my Cisco 3640 Booting Problems ??

Hi,

I  am stuck and I need your help to fix my CISCO 3460 router for my home  lab, the router load the ios and hang after loading the interfaces.

Please see below the Router IOS display:

Thanks

Alain

Cisco IOS Software, 3600 Software (C3640-JK9O3S-M), Version 12.3(14)T7, RELEASE

SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport 

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Wed 22-Mar-06 21:46 by pwade

Image text-base: 0x60008FD4, data-base: 0x62A2A000

Port Statistics for unclassified packets is not turned on.

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html 

If you require further assistance please contact us by sending email to

export@cisco.com  .

Cisco 3640 (R4700) processor (revision 0x00) with 122880K/8192K bytes of memory.

Processor board ID 28014581

R4700 CPU at 100MHz, Implementation 33, Rev 1.0

3 FastEthernet interfaces

1 Token Ring interface

4 Serial interfaces

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of NVRAM.

32768K bytes of processor board System flash (Read/Write)

*Mar  1 00:00:10.711: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0

, changed state to upsslinit fn

*Mar  1 00:00:29.367: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down

*Mar  1 00:00:29.371: %LINK-3-UPDOWN: Interface Serial0/1, changed state to down

*Mar  1 00:00:29.371: %LINK-3-UPDOWN: Interface Serial0/2, changed state to down

*Mar  1 00:00:29.371: %LINK-3-UPDOWN: Interface Serial0/3, changed state to down

*Mar  1 00:00:29.371: %LINK-3-UPDOWN: Interface FastEthernet1/0, changed state t

o up

*Mar  1 00:00:29.371: %LINK-3-UPDOWN: Interface FastEthernet1/1, changed state t

o up

*Mar  1 00:00:29.375: %LINK-3-UPDOWN: Interface FastEthernet3/0, changed state t

o up

o up

state to up

*Mar  1 00:00:31.031: %SYS-5-CONFIG_I: Configured from memory by console

*Mar  1 08:40:00.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0,

* changed state to down*

*Mar  1 08:40:00.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1,

* changed state to down*

*Mar  1 08:40:00.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/2,

* changed state to down*

*Mar  1 08:40:00.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/3,

* changed state to down*

*Mar  1 08:40:00.419: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern

et1/0, changed state to down

*Mar  1 08:40:00.419: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern

et1/1, changed state to down

*Mar  1 08:40:00.419: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern

et3/0, changed state to down

*Mar  1 08:40:00.419: %LINK-5-CHANGED: Interface Serial0/0, changed state to adm

inistratively down

*Mar  1 08:40:00.419: %LINK-5-CHANGED: Interface Serial0/1, changed state to adm

inistratively down

*Mar  1 08:40:00.419: %LINK-5-CHANGED: Interface Serial0/2, changed state to adm

inistratively down

*Mar  1 08:40:01.707: %LINEPROTO-5-UPDOWN: Line protocol on Interface TokenRing3

/0, changed state to down

11 REPLIES

Please, i need your help to fix my Cisco 3640 Booting Problems ?

Upload a newer IOS image, via ROMMON, it will boot.

it is a IOS bug.

thanks

Please, i need your help to fix my Cisco 3640 Booting Problems ?

Thank you for your quick reply. Actually I have 2 CISCO 3640 with the same issue, I did upload new IOS images in ROMMON mode but the same problem remain.

Thanks.

Hall of Fame Super Gold

Please, i need your help to fix my Cisco 3640 Booting Problems ?

Remove all the network modules and reboot again. 

Please, i need your help to fix my Cisco 3640 Booting Problems ?

I already try that option by removing all Network modules and rebooting, but it's still stuck!!!!!!

Hall of Fame Super Gold

Please, i need your help to fix my Cisco 3640 Booting Problems ?

Actually I have 2 CISCO 3640 with the same issue, I did upload new IOS images in ROMMON mode but the same problem remain.

Did you try a new IOS version?

Please, i need your help to fix my Cisco 3640 Booting Problems ?

No I did not. Which one do you suggest me to use ?

Hall of Fame Super Gold

Please, i need your help to fix my Cisco 3640 Booting Problems ?

You choose base on your the amount of DRAM and flash requirement of your routers. 

Please, i need your help to fix my Cisco 3640 Booting Problems ?

I will try with the new IOS images and will let you know.

Thanks,

Please, i need your help to fix my Cisco 3640 Booting Problems ?

Hi leolaohoo,  I ordered new RAM and flash ( 64/32), installed new ios image, still unable to get inline, WITH A NEW ERROR :

ip kerberos source-interface any

   ^

% Invalid input detected at '^' marker.

. please see below the ios image.

Thanks for your help.

System Bootstrap, Version 11.1(17)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)

Copyright (c) 1998 by cisco Systems, Inc.

C3600 processor with 65536 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

program load complete, entry point: 0x80008000, size: 0xbcee64

Self decompressing the image : #################################################

################################################################################

################################################################################

################################################################################

################################################################################

################################################################################

################################################################################

################################################################################

################################################################################

################################################################################

################################################################################

################################################################################

################################################################################

################################################################################

[OK]

Smart Init is enabled

smart init is sizing iomem

  ID            MEMORY_REQ                 TYPE

000054          0X00030000 4T Mueslix Serial

0000D8          0X00178610 Dual Fast Ethernet Combo Port Module, 2 WAN

0000D9          0X00143210 Fast Ethernet Combo Port Module, 1 Token Ring, 2 WAN

                0X0010A6F8 public buffer pools

                0X00211000 public particle pools

TOTAL:          0X00606F18

If any of the above Memory Requirements are

"UNKNOWN", you may be using an unsupported

configuration or there is a software problem and

system operation may be compromised.

Rounded IOMEM up to: 7Mb.

Using 10 percent iomem. [7Mb/64Mb]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-JS-M), Version 12.1(5)T,  RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Sat 11-Nov-00 07:24 by ccai

Image text-base: 0x60008950, data-base: 0x61476000

cisco 3640 (R4700) processor (revision 0x00) with 58368K/7168K bytes of memory.

Processor board ID 07870836

R4700 CPU at 100Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

3 FastEthernet/IEEE 802.3 interface(s)

1 Token Ring/IEEE 802.5 interface(s)

4 Serial network interface(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

ip kerberos source-interface any

   ^

% Invalid input detected at '^' marker.

Hall of Fame Super Gold

Please, i need your help to fix my Cisco 3640 Booting Problems ?

ip kerberos source-interface any

^

% Invalid input detected at '^' marker.

. please see below the ios image.

How long did this message stay up?  I mean how long did you wait before the "Press any key to continue" comes up?

Please, i need your help to fix my Cisco 3640 Booting Problems ?

FINALLY THIS IS THE SOLUTION!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I received it today, I started fixing  all my routers

Thanks any way.

Enter  ctrl + break to enter Rommon. Then type confreg 0x2142 and boot. When it  boots the IOS he needs to erase the config with Write erase. That error  shouldn't show anymore when he boots.  Change the  config-register back to 0x2102 though

838
Views
0
Helpful
11
Replies
CreatePlease login to create content