Problem with Routed Pseudowire in 7600 ES+ 3C card
I got issue when configuring routed pseudowire in 7600, when the routed pseudowire traffic go trough ES+ 3C card the ping test was bad. But, if I move the same configuration so the routed pseudowire traffic go trough 7600-ES20-GE3CXL card the problem didn't there. Did anyone experienced same issue?
Any idea about this issue? Please help to share the root cause of this problem.
The configuration of SVI below:
ip address 192.168.207.149 255.255.255.252
no ip proxy-arp
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 7 000903050F4D48091C314A0F
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...