Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

QOS for Serial Interface in IOS-XR

Hi,

I am trying to configure QOS for a FR serial interface in IOS-XR.

But I don't see an option for configuring input/output service-policy in IOS-XR 3.9.1  for serial interface. These options are available for ethernet subinterfaces..

Following is the config:

!
class-map match-any QOS2
match dscp af21 af22 af23
match precedence 2
end-class-map
!
class-map match-any QOS3
match dscp af31 af32
match precedence 3
end-class-map
!
policy-map QOS_MAP
  class QOS3
  set dscp af21
!
class QOS2
  set dscp af21
!
class class-default
  set dscp default
!
end-policy-map
!
RP/0/8/CPU0:TEST-IOS-XR(config)#interface gigabitEthernet 0/1/0/4.1416
RP/0/8/CPU0:TEST-IOS-XR(config-subif)#service-policy ?
  input   configure a policy in the input direction
  output  direction of service policy application
  type    Enter service policy type (default: qos)


RP/0/8/CPU0:TEST-IOS-XR(config-subif)#exit
RP/0/8/CPU0:TEST-IOS-XR(config)#interface serial 0/0/1/0/1/1.500
RP/0/8/CPU0:TEST-IOS-XR(config-subif)#service-policy ?
  type  Enter service policy type (default: qos)
RP/0/8/CPU0:TEST-IOS-XR(config-subif)#service-policy type ?
                                        ^
% Invalid input detected at '^' marker.
!
!
interface Serial0/0/1/0/1/1.500 point-to-point
cdp
vrf TEST
ipv4 address 10.10.10.1 255.255.255.252
pvc 500
!

Has anyone experienced this issue?

Thanks,

  • MPLS
1 ACCEPTED SOLUTION

Accepted Solutions

Re: QOS for Serial Interface in IOS-XR

Hi Kokul,

You must be in pvc mode to configure service-policy on this interface

Regards

Mahesh

2 REPLIES

Re: QOS for Serial Interface in IOS-XR

Hi Kokul,

You must be in pvc mode to configure service-policy on this interface

Regards

Mahesh

New Member

Re: QOS for Serial Interface in IOS-XR

Thanks Mahesh. It works..

I didn't check this option earlier..

Thanks,

Kokul

581
Views
0
Helpful
2
Replies