Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

QOS ME6524

1. Do you think we can do Ingress policing on ME6524 that too class based.....for example...

!
policy-map test
class voice
police 80000
class business
police 20000
class default
police 10000

!
Interface gig 1/2.200
enacpsulation dot1q 200
ip address 1.1.1.1 /30
service-policy input test

2. If I recive DOT1P frames, can I do classification based on already set DOT1P values on ME6524 downlink port ?


3. If we say the downlink port has Tx 1p3q8t structure. Are these 4 queue hardware queues or software queue ? If they are software..can we tweak the hardware queue.?

4. Also Tx on Downlink port means traffic going towards customer from ME6524 downlink lan port ?
 
dataSheet :   http://www.cisco.com/en/US/prod/collateral/switches/ps6568/ps6845/ps6846/product_data_sheet0900aecd8040657e.html

Thanks in advance.

rgds,

GP

288
Views
0
Helpful
0
Replies