Has anyone implemented CBWFQ with MPLS and used random-detect with any of the classes/queues? Is there anything special about random-detect that allows it to drop TCP v. UDP when doing label switching?
I'm basically referencing that no other headers are looked at when doing label switching. Therefore, when applying random-detect to a queue we can not easily have TCP seperated from all other traffic to maximize our chances of dropping a TCP packet to slow down the source. It appears that the commonly accepted method is to set the mark probability denominator high enough and make sure that the majority of your traffic is TCP.
Question: Have the phone connected and can ring out-but no sound coming from the handset - analog home phone - phone makes connection and pick up at the other end is ok. Can you help?
Question: Have the phone connected and can ring out-but no sound coming from the handset - analog home phone - phone makes connection and pick up at the other end is ok. Can you help?Answer
iPXE boot in ASR9K
This document applies to NCS5500 and ASR9000 routers and has been verified as such.
traditional ECMP or equal cost multipath loadbalances traffic over a number of available paths towards a destination. When one path fails, the traffic gets r...