Hello, after reading previous post about NAT, i don't have very clear how to resolve my problem.
I'm using a MPLS-VPN to connect different sites to a central site providing internet access with a PIX (old device, PIX 520 6.1), anf i've found those known problems when using PAT (users not nagating in www.hotmail.com and more)
USER - CE - PE - MPLS - PE - PIX - INET
i have configured every link in the MPLS path with MTU 1516 and tag-switching mtu 1512. And links over pure IP with MTU 1500
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...