what is the best way to configure redistribute static which only reflected first 2 static routes and ignore the default one.
access-list 67 permit 126.96.36.199 0.0.0.0
access-list 67 permit 188.8.131.52 0.0.0.0
route-map klu permit 10
match ip add 67
set local-preference 50
set weight 0
router bgp 65000
address-family ipv4 vrf AAA
redistribute static route-map klu
This is happen when HQ is become backup if branch fail. i am using ospf between PE-CE.
When branch is up again, HQ still think that best path is using HQ. when i show ip bgp vpn4, it seems that weight is 32768 and local-pref is 100. so I want to force anything originate from hq via static route with higher AD, will be assign weight to 0 and Local-pref is 50.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...