Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Routing public IP's to MPLS VPN

Dears ,

How I can route public IP's to MPLS VPNs

?

Regards

Haris

2 REPLIES
New Member

Re: Routing public IP's to MPLS VPN

Here you are:

ip route public_ip subnet serial1/0/1:0

ip route vrf test public_ip subnet s1/0/1:0

ip route vrf test 0.0.0.0 0.0.0.0 1.1.1.2 global

int gi 0/1

ip address 1.1.1.1 255.255.255.254

interface s1/0/1:0

ip vrf for test

ip add x.x.x.x /30

Bronze

Re: Routing public IP's to MPLS VPN

as dennis eludes to earlier - look up "how to inject a global route into a vpn". That will give you the info required.

OR if you cant be bothered searching :D

http://www.cisco.com/en/US/tech/tk436/tk832/technologies_configuration_example09186a0080231a3e.shtml

192
Views
0
Helpful
2
Replies