I am troubleshooting (MPLS VPN issue) ATM problem on Cisco 10000 router IOS Version 12.0(20020314:211744).
I have issued command
dsl#sh atm pvc ***/***
ATM*/*/*.****: VCD: ****, VPI: ***, VCI: ***
UBR, PeakRate: 573
CDVT: 714.0 Usecs, High Watermark: 192, Low Watermark: 128
AAL5-MUX, etype:0x9, Flags: 0x24, VCmode: 0x0
OAM frequency: 0 second(s), OAM retry frequency: 1 second(s)
OAM up retry count: 3, OAM down retry count: 5
OAM Loopback status: OAM Disabled
OAM Managed VC Status: Not Managed
ILMI Managed VC status: Not Managed
InARP DISABLED
High Watermark: 192, Low Watermark: 128
InPkts: 125, OutPkts: 192, InBytes: 960, OutBytes: 2254
InPRoc: 119, OutPRoc: 191, Broadcasts: 0
InFast: 6, OutFast: 0
InPktDrops: 0, OutPktDrops: 0
Out CLP=1 Pkts: 0
OAM cells received: 5
F5 InEndloop: 0, F5 InSegloop: 5, F5 InAIS: 0, F5 InRDI: 0
F4 InEndloop: 0, F4 InSegloop: 0, F4 InAIS: 0, F4 InRDI: 0
OAM cells sent: 10
F5 OutEndloop: 5, F5 OutSegloop: 5, F5 OutRDI: 0
F4 OutEndloop: 0, F4 OutSegloop: 0, F4 OutRDI: 0
OAM cell drops: 0
Status: UP
PPPoA Current State = LCP_NEGOTIATION
PPPoA Latest Event = PPP Msg
PPPoA Latest Error = None
PPPoA Session ID = 4412
PPPoA Handle = 0xC4020E7E, SSS Handle = 0x3601048C
Switch Handle = 0x0D01075B, PPP Handle = 0xC7010FC9
AAA Unique ID = 0x1223F4CE, AIE Handle = 0xF2000159
PPPoA Debug(s): Event Error
This router is connected to MGX 8850 I can see cell count in MGX (Ingress & Egress both) from this router segment ping (atm pvc) is successful but I can do ping (atm pvc) device. I have noticed this changes
PPPoA Current State = WAIT_FOR_CALL
PPPoA Latest Event = AAA unique id allocated
PPPoA Latest Error = None
PPPoA Current State = LCP_NEGOTIATION
PPPoA Latest Event = PPP Msg
PPPoA Latest Error = None
Because of this my end user can’t connect to VPN.
Can anyone help me to solve this puzzle.
