I am getting the following error message on the MPLS-PE router. As there are lot of customers with same ip address (in different vrf) how do I trace which customer is sending the snmp requests. Is there any quick method to resolve this issue.
Sep 10 13:14:49: %SNMP-3-AUTHFAIL: Authentication failure for SNMP req from host 192.168.100.10
I don't think that this customer is behind any of your vrf, it should have a direct ip connectivity to your network........ so check in your network do you have any pc or server which is sending/doing snmp to your box with that ip address.....
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...