any body knows if Cisco has implemented on any plataform The TDM over mpls implementation aggrement compliant in the mpls forum?. I`m Trityng to tranport tdm circuits (DS0) over mpls backbone. I know that pwe3 permit us transport layer 2 circuits like atm, frame-relay or ethernet, but i dont find anything about layer 1 circuits or tdm
Re: TDM Transport Over Mpls Implementacion aggrement
The move by service providers to migrate legacy networks based on time division multiplexing (TDM), Frame Relay, and ATM into intelligent, integrated, Internet Protocol/Multiprotocol Label Switching (IP/MPLS) packet-based networks capable of supporting converged network services is well under way.Refer URL
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...