Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

TELNET in MPLS

Hi,

How can i telnet in MPLS, Please let me know the syntax.

Thanks & regards,

Srinivas.S

8 REPLIES
New Member

Re: TELNET in MPLS

telnet a.b.c.d /vrf VPN_EXAMPLE

New Member

Re: TELNET in MPLS

thanks for the reply.

I have been trying the same telnet a.b.c.d /vrf VPN_EXAMPLE but iam not able to telnet, there is no access list restrictions in the router for line vty. is there any other way.

regards,

Srinivas.S

Bronze

Re: TELNET in MPLS

Check if the prefix is in the vrf table ?

Are u redist Connected for that VRF

New Member

Re: TELNET in MPLS

PE>sh ip vrf

Name Default RD Interfaces

abc_xyz 123:2004 Serial4/6

New Member

Re: TELNET in MPLS

Can you telnet the device itself but not VRF?

New Member

Re: TELNET in MPLS

Iam able to ping and trace but not able to telnet with and without VRF.

Thanks & Regards,

Srinivas.S

New Member

Re: TELNET in MPLS

Try this:

telnet a.b.c.d /vrf VPN_EXAMPLE /source-interface OUTGOING INTERFACE

New Member

Re: TELNET in MPLS

I am sure that I have seen this in the past, on some older versions of IOS I could ping from a VRF but was not able to telnet out of it... your command looks good to me .. might just be an IOS thing ??

1236
Views
0
Helpful
8
Replies