Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

Trouble setting up remote access vpn

26-Jul-2013 09:41 (in response to ciscomoderator)

Re: Ask the Expert: Understanding MPLS L3VPN: concepts, terminology, control and data plane call flow

Keddian Gilbert


Concerning the nature of my problemes, am trying to setup a remote access vpn to my 3620 series router; however

am not able to use the command prompt because of my limited knowledge of the necessary commands. to configure a remote VPN conniction.

I checked out several instructions on the internet but all of them used GROUP PROFILE and the TUNNEL command in their config

which my router does not support. All I want is the specific configuration for this version IOS seeing  it differs in configuration.

I cant use SDM. My router does not have enough memory to accept it.

Here is an out put of a SHOW VER  command

digix-lan>sh ver

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3620-JK9S-M), Version 12.2(29), RELEASE SOFTWARE (fc3)

Technical Support:

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Wed 11-May-05 12:54 by kellmill

Image text-base: 0x60008930, data-base: 0x61598000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

ROM: 3600 Software (C3620-JK9S-M), Version 12.2(29), RELEASE SOFTWARE (fc3)

digix-lan uptime is 2 days, 1 hour, 42 minutes

System returned to ROM by power-on

System image file is "flash:c3620-jk9s-mz.122-29.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

cisco 3620 (R4700) processor (revision 0x81) with 60416K/5120K bytes of memory.

Processor board ID 10707060

R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

4 Ethernet/IEEE 802.3 interface(s)

DRAM configuration is 32 bits wide with parity disabled.

29K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

I really need this help sir! THANK YOU much


CreatePlease to create content