Im creating a new service for our company to provide vpn connections to our cable subscribers. From cable modem accross MPLS network no problem since i can do vlan rewrite, on the UBR TLS one mac per vlan. My problem would be if i have clients connected to the same UBR, can i do local switching on the same MPLS router?
I'd suggest running MPLS PWs to split the customers over seperate VCs. This would be done by configuring either static or dynamic pseudowires and then provisiong the customers to these, and connecting them via L2VPN.
I have found some useful guides on how to do you would do this.
Thanks for these info, my problem would arise if the cable modem clients lies on the same UBR and they want to exchange info. Is there a local switching on the UBR or even in the MPLS router? xconnect to the same mpls router would not work, is there any work around?
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...