Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Verizon Gold CAR, QoS thru MPLS

We have a Verizon MPLS network that we purchased Gold CAR from Verizon.

Verizon says the Gold CAR package is for voice only (ef class)

My questions is regarding implementing QoS for voice, video and data priority classes.

How do I implement the policy?

Does the Gold CAR only allow me to prioritize the voice traffic?

Does it automatically prioritize voice without me applying a policy?

Can I prioritize the other classes only, or does my QoS poliy include everything?

8 REPLIES

Re: Verizon Gold CAR, QoS thru MPLS

HI Wilson, [Pls RATE if HELPS]

Use modular quality of service command-line interface (MQC).

The bandwidth command defines a behavior, which is a minimum bandwidth guarantee.

Use priority command to give priority to a traffic class based on the amount of available bandwidth within a traffic policy. In addition, the priority command implements a maximum bandwidth guarantee.

Refer Verizon SLA/Solution on the GOLD CAR policy before the decision.

Hope I am informative.

Best Regards,

Guru Prasad R

Silver

Re: Verizon Gold CAR, QoS thru MPLS

Hi Wilson

In addition to guru reply:

Priority commands alwasy use the policing not shaping. It means either the packets will forward or drop. It is always recommended not to use shaping in case of voice traffic.

regards

shivlu jain

New Member

Re: Verizon Gold CAR, QoS thru MPLS

Thanks for the reply.

According to Verizon they are only prioritizing the ef class.

If I create a QoS policy, that has

Voice Priority

Video Priority

Voice signaling priority

Data Priority

And Verizon is only prioritizing ef, then what is happening to the other classes I have created my QoS policy for?

If they get prioritized per my policy, why do I need the Gold CAR?

If they do not, then I dont need to even create a policy do I?

Silver

Re: Verizon Gold CAR, QoS thru MPLS

If they are priotizing EF traffic then you need to send the traffic by marking the EF bits else your traffic will be put in the class default and will become the least priotize.

regards

shivlu jain

Re: Verizon Gold CAR, QoS thru MPLS

HI,

In addition to Shiv's reply, here is the sample configuration:

class-map match-all EF

match ip dscp ef

policy-map Marking

class EF

interface FastEthernet0/0

desc ****LAN Interface****

service-policy output Marking

Pls RATE if HELPS

Best Regards,

Guru Prasad R

New Member

Re: Verizon Gold CAR, QoS thru MPLS

Ok,

Say for example, with the above information (Verizon is only prioritizing ef class and I have T1 with 768 Gold CAR), I have this policy:

policy-map QoS

class VOICE

priority 512

set dscp ef

class DATA-Priority

set dscp af31

bandwidth 128

class class-default

set dscp default

fair-queue

random-detect

If Verizon is only prioritizing the ef class, is the rest of my policy doing anything?

What is happening to the data in these classes?

class DATA-Priority

set dscp af31

bandwidth 128

class class-default

set dscp default

fair-queue

random-detect

Are they not getting prioritized at all?

Re: Verizon Gold CAR, QoS thru MPLS

HI Wilson,

Please check whether your Service Provider is doing Egress QOS ?

-During the congestion conditions, the bandwidth class implements the min bandwidth guarantee

-Any excess traffic is sent in the link if the link is not congested (or) dropped if the same is congested

Pls RATE if HELPS

Best Regards,

Guru Prasad R

New Member

Hi Willson,

Hi Willson,

Who can determine if e.x 2.5 Mbps of Gold CAR is needed on the any one of the site Verizon MPLS circuit ?
if there is any intent to carry VoIP traffic between two sites and the remote sites on Verizon MPLS?
Will this Verizon circuit be carrying VoIP traffic to other Verizon sites?

14794
Views
20
Helpful
8
Replies