we want to deploy voip for multiple location over the mpls lines we have between the multiple location can any body suggest the feasibility and how to do it and any related document and guidance for that
Thanks for Your comments actually in our scenrio we are integerating our local PBX system with MPls router using E-1 between router(MPLS) and PBX and the vo-ip and pots configured on the same router and i am looking for this feasibility wether we can use the same interfaces to configure the pots and voip which are configured with the mpls connectivity.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...