I would like to know If VPLS multihoming redundancy feature is avilable at Cisco or not ?
have a CE connected to two different PEs for redundancy. PEs are configured in a VPLS mode. At steady state only primary PE should carry traffic ... xSTP should not be configured due to its slow convergence compared with VPLS
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...