Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPLS support on ASR 9000

with all respect and salute,

i am new to ASR9K routers, but i am following up the light shed by Mr. xander over it.

we are going to deploy ASR9K at both MPLS core and edge and we must deploy VPLS among them as PE routers.

1- what kinds of line cards we must select toward P and CE at the edge?

2- do we have the same limitation as 7600 in which we must select ES+?

3- can we use low queue ethernet line cards toward P and CE?

4- i have the same above 3 questions for ASR 1000.

 

best regards,,

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

VPLS is supported on both low

VPLS is supported on both low queue and high depth queue cards. Difference being Low queue will have some limitations on QOS. You need to select the card based on your RP, the 2 main categories being Trident and Typhoon. Trident being the old one and Typhoon being the new one supported with RSP440. So if running with 440, please select Typhoon cards.

Best Wishes,

Mohit

2 REPLIES
Cisco Employee

VPLS is supported on both low

VPLS is supported on both low queue and high depth queue cards. Difference being Low queue will have some limitations on QOS. You need to select the card based on your RP, the 2 main categories being Trident and Typhoon. Trident being the old one and Typhoon being the new one supported with RSP440. So if running with 440, please select Typhoon cards.

Best Wishes,

Mohit

New Member

hello dear mohisaxe,thanks

hello dear mohisaxe,

thanks for your support and so sorry for the late response! :)

75
Views
0
Helpful
2
Replies
CreatePlease login to create content