VPNv4 RR Design

[harindhafdo]

hi,

I would be greatful if you could send me a good document on designing Route Reflectors for MPLS VPNv4 with best practices.

Rgds,

Harin

[swaroop.potdar]

Hi Harin,

I have mentioned some important links for you to study through for RR Design & Implementation.

Just a note that RR design for IPV4 IBGP and VPNV4 MPBGP is not at all much different, except for

the extended communicaties exchanged in VPNV4. The path slelection & propogation rules remain the same.

HTH-Cheers,

Swaroop

Route Reflector Design For MPLS VPN

http://www.juniper.net/solutions/literature/white_papers/200160.pdf

BGP Peer Groups.

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093fb7.shtml

MultiPath Load Sharing

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00800b5d5f.html

BGP Best Path Selection Algorithm

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094431.shtml

BGP Protocol Home Page

http://www.cisco.com/en/US/tech/tk365/tk80/tsd_technology_support_sub-protocol_home.html

[harindhafdo]

Hi Swaroop,

thanks for the update.

cheers

Harin