Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VRF-Lite QOS on Ethernet Subinterfaces

The router is not allowing me to add QOS service policy under Ethernet subinterfaces in a VRF-life setup on 7206.

Would QOS work for all the VRF if I create multiple classes for each VRF under one main policy-map and apply to main interface?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: VRF-Lite QOS on Ethernet Subinterfaces

7 REPLIES
Cisco Employee

Re: VRF-Lite QOS on Ethernet Subinterfaces

Hi,

Could you share your configuration ? it should work.

Thanks

Laurent.

New Member

Re: VRF-Lite QOS on Ethernet Subinterfaces

Laurent,

Thanks for the reply.

Can you provide a link for the sample as I can't find any sample from CCO and what I found are all under Ethernet physical interface for VRF based QOS.

We can apply the QOS under subinterfaces for GSR PE router but the CE are 7206s.

We need to make sure it works before we create the temple for our IE.

Cisco Employee

Re: VRF-Lite QOS on Ethernet Subinterfaces

I was not able to find any useful link on CCO.

Could you post the error message and the service-policy you want to apply per subinterface ?

Thanks

Laurent.

New Member

Re: VRF-Lite QOS on Ethernet Subinterfaces

New Member

Re: VRF-Lite QOS on Ethernet Subinterfaces

Here is what I got from the 7206:

Router(config)#int f0/0.1

Router(config-subif)#ser

Router(config-subif)#service-policy ?

input Assign policy-map to the input of an interface

output Assign policy-map to the output of an interface

Router(config-subif)#service-policy output ?

WORD policy-map name

Router(config-subif)#service-policy output PIP-EMDC-BAKU-3400

CBWFQ : Not supported on subinterfaces

Router(config-subif)#

It is only expecting input or output not the policy map but is not taking it somehow.

Cisco Employee

Re: VRF-Lite QOS on Ethernet Subinterfaces

Ok so the link provided by Jon explains your issue and how to resolve it.

Let me know if you have other question regarding this non support of CBWFQ on subinterfaces.

Thanks

Laurent.

New Member

Re: VRF-Lite QOS on Ethernet Subinterfaces

Yes, the link that Jon provided works.

Thanks for the helps.

2251
Views
0
Helpful
7
Replies