hi! is there anyway that i can authenticate user login thru Microsoft AD/IAS to the cisco switch/router without using Cisco ACS or any paid solution? Thx
hi! is there anyway that i can authenticate user login thru Microsoft AD/IAS to the cisco switch/router without using Cisco ACS or any paid solution? Thx
Hi all, quick question about ISE:How can ISE prevent people from connecting to the network using personal devices, ensuring that only corporate devices can access the network and get a valid IP address?Thanks!
Hi,I've recently been looking into linking in our Cisco 2960S Gb Switch with RSA SecureID via RadiusI've already managed to link it in for ssh accessbut I've not managed to get it working for http / web access to the switchI think this is because we'...
Hi NetproI have router locked (telnet and console) due to aaa-new model configuration , how to unlock this router , i nned to access it through the networkN:B,I have on the router local user name in the DatabaseThanks
Hi,My ACS SE appliance 1113 is currently running with 4.1.1.23. I need to upgrade the software. Which is the latest software version available for ACS SE 1113. At max which version can I load ?Thanks in advance
Hi,We are running ACS 5.2 with AD support.When a user changes their password in AD after it expires,they are not able to login any of the devices, authentication failed from ACS.The error that come up in the authentication log is :24407 User authenti...
Hello netprohow to Config the ACS 4.2 server runs in TACACS + mode (users accounts configured the ACS) mode to authenticate enable mode password on the asa using the same AD account? thanks
HiAre there any recommendations for configuring the VM for the ACS 5.x? What are the required minimum CPU-Cycles to dedicate and also the minimum RAM to dedicate?Kind regardsRoberto
Hi,Does anyone know if node groups are purely for policy server nodes behind a load balancer such as ACE. If you have a pair of policy server nodes at a site with no load balancer, and both nodes configured in all NAS's can these be in a node group....
We have a pair of ACS 4.1 servers (Windows Server 2003 R2). Let's call them ACS1 and ACS2.We don't want either one of them to proxy to any AAA server, including each other. We're using mostly TACACS authentication.While troubleshooting a general prob...
Hello,I'm pretty sure it won't be possible to do what I want to do, but I thought I'd ask the experts anyway...We have remote users that dial-in over ISDN to a Cisco 2911. We have configured AAA to pass the authentication off to a RADIUS server. Once...
Hi Guyz,Good Day,I have ACS 4.2 on vmware machine, everything is working fine. Automatically backup is already set on local machine, but the thing is, i want to configure automatically backup on my file server (ex. \\1.1.1.1\acsbackup). Even though i...
Hi,We are testing ISE in a wired environment.We have set up two authorization profiles called AD_Machine and AD_User as recommned in Trustsec 2.0 doc. The AD_Machine policy has a condition set on it to look at the AD External Group AD Machines, like...
Hi all,We have 2 ACS 4.2.1 servers in Windows 2003 with SP2 installed. We have updated the first ACS to the latest patches for Windows. After that we started having problems. CSRadius either stops by itself or when some time passes we get the followi...
I installed ACS 5.2 on Wmware. Everything seemed to install correctly.I can access the server with SSH over the network. The server howeverdoesn´t seem to have https mangagment open. For example show ports gives only port 22 (ssh)and 111 for udp and ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-28-2024 02:18 AM | ||
04-27-2024 05:08 AM | ||
04-25-2024 01:33 AM | ||
04-22-2024 08:17 AM | ||
04-18-2024 08:46 AM |
User | Count |
---|---|
7 | |
6 | |
6 | |
1 | |
1 |