Hi!1. I need sample config (router and tacacs )for imlementing Role-based CLI on Cisco IOS Router with CS ACS(Tacacs+) or free-Tacacs servers?2. How to add more Tacacs attributes to Cisco Secure ACS 2.3 Unix?Tnx
Hi!1. I need sample config (router and tacacs )for imlementing Role-based CLI on Cisco IOS Router with CS ACS(Tacacs+) or free-Tacacs servers?2. How to add more Tacacs attributes to Cisco Secure ACS 2.3 Unix?Tnx
I have an issue with a switch's syslog messages showing up in the failed authentication attempts report in the AAA.If anyone has any thoughts, let me know!!CHRIS
I successed to let remote access users to be authenticated using ACS(which use windows database)\.but this did not work with WebVPNit's only successed with Internal database.
Is there a possibility to clear the complete database on acs appliance without changing the ip configuration?
Hi AllSituation: I have a Router that has TACACS+ Auth enabled verifying against ACS 3.3.3. This router has also has a number of Async lines that provide out-of-band access to other network devices. I allow a security group defined in ACS access ...
This is regarding remote VPN connectivity to PIX from vpn client. VPN group is getting authenticated . But local user as configured in following commandcrypto map abc client authentication local. User is not getting authenticated.If this command is ...
I'm trying to setup IP-based network restrictions for users on my ACS server. This is easy enough to do manually but i want to add these via RDBMS and the accountactions.csv file.my problem is the documentation suggests the following:"V1 should cont...
We have two ACS Solution Engines (4.0), which basically act as primary and secondary AAA servers. Is there a way to replicate the external database group mappings from one ACS to another? Currently, replication is successfully copying the internal ...
I have configured PIX for Cisco VPN client for remote access.It gets connected and also inside network can be accessed. This is without any username authentication. This works ok with a vpngroup name and password for that vpngroup, configured on P...
I would like to know on 3745 and 2811 what is the maximum size or number of users/line for local database authenticatione.guser1 password 0 temp1user2 password 0 temp2how many users I can put in?Is there a maximum number of lines limit in IOS configu...
Hi,i have the following Problem:VPN Clients (Vers. 4.6) tries to connect to the VPN Concentrator 3020 (Vers. 4.1.7)the Authentication will be done with the sequence of ACS and ACE.This Authentication sometimes works and sometimes doesn't work.For you...
smtp mail server is ok ,when i stop cisco ACS server,it does not send e-mail to my mail-box,why?
Hello,What would be required to have an ACS server in a DMZ talk to the active directory domain that is on the outside of the fw.ACS-----(dmz)PIX(outside)---AD DomainOne department owns the DMZ and wants the ACS server to be in the DMZ and the other ...
I have a 3002 concentrator connecting to a 3030. Using Lan Extension Mode. The 3002 is using DHCP to assign addresses. I want the users connecting to the 3002 to be forced to authenticate with a domain server on the head-end (3030 side). I want no on...
I´m doing some tests with the new 802.1x authentication feaures in the CAT2960 switch and IOS firmware file 'c2960-lanbase-mz.122-25.SEE.bin'. In particular, I´ve configured the 'Inaccesible Authentication Bypass' feature. What is wrong with it is th...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-27-2024 05:08 AM | ||
04-25-2024 01:33 AM | ||
04-22-2024 08:17 AM | ||
04-18-2024 08:46 AM | ||
04-18-2024 02:57 AM |
User | Count |
---|---|
7 | |
6 | |
6 | |
1 | |
1 |