Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Search instead for
Did you mean:
A 3600 series router displays the %OIRINT: OIR Event has occurred error message
Online Insertion and Removal (OIR) of network modules is not supported on Cisco 3620 and 3640 series routers. A drop in output voltage from the power supply is reported as an OIR event. Such events on the 3620 and 3640 series routers typically indicate a hardware problem. Although the 3660 series router does have limited support for OIR, spurious OIR events that occur without the physical insertion or removal of a network module can also indicate a problem with the hardware.
Reseat all of the network modules. If there are WAN Interface Cards (WIC) installed in the network modules, reseat them as well. The 3620 and 3640 series routers do not support OIR, so the router needs to be powered off.
To determine the faulty module without converting the hexadecimal field, power down the router and remove all the network modules. Insert one module and power the router on. If the error is not present, power off, and add another module. Repeat until the faulty module is discovered.
If you receive the %OIRINT: OIR Event has occurred oir_ctrl 10 oir_stat CFCC error message on the 3620 or 3640 series router, the power supply is failing.
When a hardware replacement is indicated after troubleshooting:
If you have a hardware support contract directly with Cisco for this part, use the Service Order Submit Tool to request a replacement part directly.
For warranty service, contact the Cisco Technical Assistance Center (TAC) directly at 1-800-553-2447, or online by using the TAC Service Request Tool.
If your product is not covered by contract or warranty, contact your Cisco partner or reseller to request a replacement part for the hardware component that is causing the issue.