Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Enabling routing ip on cisco 3750 stack

hello,

i need to run  an network architecture based on cisco switchs 3750.

i have:

1 stack of 3  3750 swichs, bacbone of the network and 7 swichs 2960S interconnected  to the 3750 stack.

  i have 6 Vlans in the architecture

Vlan 1 : Default - 10.10.0.1 /24
Vlan 2 : site A - 10.10.1.1 /24
Vlan 3 : site B - 10.10.2.1 /24
Vlan 4 : site C - 10.10.3.1 /24
Vlan 6 : VOIP - 10.10.5.1 /24
Vlan 10: LAN - 192.168.1.1 /24

atm  the iso  on 3750 is :

c3750e-universalk9-mz.122-55.SE3/c3750e-universalk9-mz.122-55.SE3.bin"

I try to activate  in conf terminal   with the command " ip route " but command not reconized..

Could someone give me a hand please ?

regards,

Ludovic

Version history
Revision #:
1 of 1
Last update:
‎07-12-2011 07:11 AM
Updated by:
 
Labels (1)