Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

How to add an AAA server to WLSE


To add an Authentication, Authorization and Accounting (AAA) server to Wireless LAN Solution Engine (WLSE), perform these steps:

  1. Select Devices > Discover > AAA Server.
  2. Enter this data:
    1. Show list: Select server type from the pulldown list: 
      • Extensible Authentication Protocol-Message Digest 5 (EAP-MD5)
      • Light Extensible Authorization Protocol (LEAP)
      • Protected EAP (PEAP) (EAP-Generic Token Card [GTC] only)
      • RADIUS
    2. Server name: Hostname or IP address of the AAA server.
    3. Server port: Port on the server that is used for authentication. This should always be 1645.
    4. Username: Client username that you entered on the LEAP server.
    5. Password: Client password that you entered on the LEAP server.
    6. Secret: Shared secret key that you entered on the LEAP server.
  3. Click Save.
  4. To discard your entries, click Cancel.

For more information, refer to the Adding an AAA Server section of Managing Devices.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 05:27 PM
Updated by:
Labels (1)
Everyone's tags (3)