Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

How to configure load balancing between multiple DHCP servers connected in a switched network

Core issue

This configuration is desired when there are two DHCP servers on the network, and IP helper addresses are configured for each server. However, only one server receives most of the DHCP address requests.

In order to verify that only one server receives most of the requests, it is necessary to perform a sniffer trace on the ports connected to DHCP servers.


If there are multiple DHCP servers, load balancing is not possible because the DHCP client PC-broadcasts a DHCP discover packet sourced from and destined for By default, the router blocks all of the broadcasts packets.

Refer to Understanding and Troubleshooting DHCP in Catalyst Switch or Enterprise Networks and Configuring the Catalyst Switched Port Analyzer (SPAN) Feature for additional information.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 06:10 PM
Updated by:
Labels (1)