Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure SNMP polling and traps across a PIX Firewall

Core issue

When Network Management Station (NMS) and Network Devices fall on either sides of the PIX Firewall, some extra configuration must be done on the PIX to allow Simple Network Management Protocol (SNMP) communication to pass though it.

Resolution

To resolve the issue, refer to Using SNMP with the Cisco Secure PIX Firewall.


Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 03:32 PM
Updated by:
 
Labels (1)
Everyone's tags (5)