Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Interface Input Queue Monitor

Posted By:

tsammut

Posted Date:

Mar 06, 2008

Category:

Security

Version:

20080304

License:

Cisco-Style BSD

Summary:

Sends syslog message when full interface input queue is detected.

Script Modified Date:

Mar 31, 2008

Cisco IOS Version tested:

12.4T

Cisco Products Tested:

Various

Environment Variables used:

EEM_INTERFACE_INPUT_Q_DEBUG

Rating Count:

0

Average Rating:

0

File Size:

2.5 KB

Script Info URL:

This EEM policy detects full interface input queues. When a full  queue has been detected, a syslog message is sent. The number of items  in each interface input queue, as well as the maximum queue length, is  determined using the EXEC command 'show interfaces'.    The following is  an example of the syslog message produced by this policy.     %HA_EM-4-LOG: tmpsys:/eem_policy/interface-input-q.tcl: Interface  Ethernet0/0 input queue full. Input queue: 76/75 (size/max)

Comments
New Member

Hi,

Just wrote a BASH script that can detect when the queue is full and automatically reboot the router. Also I'm going to add the syslog message trap plus reboot schedule.

If you are interest, please contact me on lvrfrc87@gmail.com

Federico 

New Member

Hi,
I get an error. Do you know any reason why?

887VA(tcl)#source flash:interface-input-queue.tcl
invalid command name "::cisco::eem::event_register_timer"
::cisco::eem::event_register_timer watchdog name sixtySeconds time 60
^
% Invalid input detected at '^' marker.

887VA(tcl)#

1793
Views
0
Helpful
2
Comments